bipluk
Sign Up
● Manufacturer Profile & SysEx Specifications

Roland SysEx Librarian & Patch Vault.

Roland was one of the primary architects of the original 1983 MIDI specification alongside Dave Smith. From the analog warmth of the Juno and Jupiter series to the revolutionary Linear Arithmetic (LA) PCM synthesis of the D-50 and the massive 64-voice polyphony of the JV-1080, Roland synthesizers defined the sound of 1980s pop, ambient, and 90s film scoring. Roland SysEx protocol is renowned for its strict 7-bit two's complement checksum validation and dual-mode One-Way / Handshake transfer architecture. Bipluk provides instantaneous, zero-install Web MIDI SysEx backup, soundbank recall, and voice diagnostics across all vintage Roland hardware.

# Roland Hardware & Protocol Architecture

Manufacturer SysEx ID: 0x41 (65 decimal)
Origin / Founded: Osaka / Hamamatsu, Japan (Founded 1972 by Ikutaro Kakehashi)
Synthesis Era: Analog Subtractive, Linear Arithmetic (LA), Super JV & ACB Modeling
Handshake Protocol: Roland Checksum (128 - sum % 128) with RQ1 (0x11) / DT1 (0x12) Packet Frames
Battery Standard: CR2032 3V Lithium with solder tabs (Juno-106, D-50, Alpha Juno); 2.2V SRAM retention floor
Signature Silicon: Roland IR3109 Quad OTA, Roland 80017A Voice SIP, BA662 / BA6110 VCAs, MN3009 BBD Chorus

Standard Memory Protect Procedure:

Roland synths typically utilize a physical 3-position or 2-position 'PROTECT' switch on the rear panel (Juno-106, Alpha Juno, JX-3P) or a software lock in the TUNE/FUNCTION menu (D-50, JV-1080).

Hardware Advisory:

Leaking black potting resin on 80017A voice modules causing voice screaming or dropouts in Juno-106; dead CR2032 batteries wiping all 64 user patches in Roland D-50.

# Supported Roland Hardware Synthesizers

4 Synthesizers
Roland Juno-106 >
1984

Subtractive Analog (1 DCO per voice, 24dB LPF)

Roland Jupiter-6 >
1983

Subtractive Analog (2 VCOs per voice, Multi-mode Filter)

Roland D-50 >
1987

Linear Arithmetic (LA) Synthesis

Roland Juno-60 >
1982

Subtractive Analog (1 DCO with Sub-oscillator)

Related Roland Engineering Glossary Terms

Roland SysEx Checksum Algorithm A 7-bit two's complement additive parity calculation used by Roland synthesizers (D-50, Juno-106, JV-1080) to validate message integrity. Roland 80017A VCF/VCA Voice Chip Failure & Restoration The custom hybrid SIP voice module inside the Roland Juno-106 and MKS-7 that inevitably fails due to conductive black potting resin. Roland IR3109 Quad Operational Transconductance Amplifier (OTA) Roland's proprietary quad OTA integrated circuit powering the filters of the Jupiter-8, Juno-6, Juno-60, and early MKS-80. Bucket Brigade Device (BBD) Analog Stereo Chorus (MN3007 / MN3009) Analog charge-transfer delay line ICs used to generate the iconic wide stereo chorus in Roland Juno and modern boutique synthesizers. Roland DCB (Digital Communication Bus) Roland's proprietary pre-MIDI digital control interface introduced in 1982 on the Juno-60 and Jupiter-8 before the MIDI 1.0 standard was ratified. Roland One-Way vs Two-Way Handshake Protocol (RQ1 / DT1) Roland's duplex communication standard using Request Data (RQ1 0x11), Data Set (DT1 0x12), Acknowledge (ACK 0x43), and End of Transmission (EOT 0x45).
31250 bps

Back Up Your Roland Patches to the Cloud

bipluk runs directly in Chrome with zero driver installation. Connect your USB-MIDI interface and start backing up Roland soundbanks in seconds.

Create Free Vault >